Library
TVW Digital Library Listing
The Club’s library offers electronic media only – DVDs, CD, and VHS tapes. Members may donate the original media to the library if they wish. Once donated, it becomes property of the Library. Items are checked out at any general Club meeting and must be returned at the next meeting. While the item is in your possession you are expected to take good care of it and replace it if damaged or lost. Of course, you won’t be held accountable for normal degradation of the media. This valuable resource gives members access to digital media at no cost, but it is limited, so members need to be sensitive to the check-out and check-in requirements. If you have media you would like to donate, or would like to reserve a certain video, contact August Dobert. His contact information is listed on the membership roster in the “Club Info” section.
Some of the Club’s videos are available for viewing over the Internet. Click on the linked name of the video to view it directly. If you prefer, you can download it by using the “Save Target As” function of your browser. These videos are property of the Tennessee Valley Woodworkers Club and are made available for individual viewing only. You must request permission for any other use. See Contact Us in the header of this page.
You can view “Odds & Ends” — A short sampling of clips by clicking here.
The February 19, 2022 Club seminar hosted by Matt Brothers and presented by Jack Kincella is available on YouTube by clicking here: https://www.youtube.com/watch?v=G_tQDRnO7Yo&t=10s
Lava River project — Jack Kincella and Tom Gillard — on YouTube at https://www.youtube.com/watch?v=n_knESXKn2s&t=1606s
TITLE | AUTHOR/PRESENTER | NUMBER |
---|---|---|
Very short flip seg cutTVW_Video/very short seg flip cutting.wmv | Loyd Ackerman | |
TVW_Video/biangle sled.wmv | Loyd Ackerman | |
Marugg shop tour | ||
Henry Davis Blue Monarch installation sequence | ||
Ronnie Youngs Tea Caddy slide show | Ronnie Young | |
Brothers Seminar – Segment 1 | Matt Brothers | |
Brothers Seminar – Segment 2 | Matt Brothers | |
Brothers Seminar – Segment 3 | Matt Brothers | |
Brothers Seminar – Segment 4 | Matt Brothers | |
Matt Brothers Mission Style Library Table 2015 | Matt Brothers | |
short highlight Brothers project | Matt Brothers | |
Lazy Man Project | Loyd Ackerman | N |
Expo 2014 Promotion video | Loyd | N |
DVD — Longworth Chuck | Loyd Ackerman | 2112 |
DVD — Master Woodcarving — Tips and Shortcuts | Nora Hall | 2111 |
DVD — Advanced European Woodcarving | Nora Hall | 2110 |
DVD — Beyond the basics of European Woodcarving | Nora Hall | 2109 |
DVD – CNC – A Trend In Woodworking? | Bob Addington | 2108 |
VHS — Wood Finishing with Jerry TerHark | Jerry TerHark | 2107 |
DVD –Tour of Gary Runyon’s shop | Gary Runyon | 2106 |
DVD – Turning Projects Volume 2 05 | Rex Burningham and Kip Christensen | 2105 |
DVD – Turning Projects Volume 1 4 | Rex Burningham and Kip Christensen | 2104 |
DVD – Installing Trim | Craig Savage | 2103 |
DVD – Router Joinery | Gary Rogowski | 2102 |
DVD – The Basics of European Woodcarving | Nora Hall | 2101 |
DVD – Pattern Making and Cutting | Charles Neil | 2100 |
DVD — Scrollsaw program – April 19th, 2011 | Debra Crane | 2099 |
CD — Shop Storage Solutions | American Woodworker Series | 2098 |
DVD — Alf Sharp Feb 15, 2011 Full presentation (65 minutes) | Alfred Sharp | 2097 |
DVD — Alf Sharp Feb 15, 2011 Photo presentation (15 minutes) | Alfred Sharp | 2096 |
DVD – Using CNC In Woodworking | Geoff Roehm | 2095 |
VHS – Jointer and Planer – Set-up and Operation | The Shopclass Series | 2094 |
VHS – Shaper – Set-up and Operation | The Shopclass Series | 2093 |
VHS – Table Saw – Set-up and Operation | The Shopclass Series | 2092 |
DVD – A Quarter Century Of The Tennessee Valley Woodworkers | Loyd Ackerman | 2091 |
DVD – Extreme Woodworking | James Perry | 2090 |
VHS – Shop Secrets From Master Craftsmen | Time/Life Series | 2089 |
DVD – Router Tables | KREG – Pocket Hole Solution Series | 2088 |
DVD – Tables | KREG – Pocket Hole Solution Series | 2087 |
DVD – Cabinetmaking | KREG – Pocket Hole Solution Series | 2086 |
CD – Pictures from TVW scrapbooks | Henry Davis | 2085 |
DVD – Essential Woodworking Techniques | Woodworker’s Journal Series | 2084 |
DVD – Cabinet Making Techniques | Woodworker’s Journal Series | 2083 |
DVD – Furniture Making | Woodworker’s Journal Series | 2082 |
DVD – Router Tables | Marc Sommerfeld | 2081 |
DVD – Glass Panel Doors | Marc Sommerfeld | 2080 |
DVD – Arched Raised Panels | Marc Sommerfeld | 2079 |
DVD – Cabinetmaking | Marc Sommerfeld | 2078 |
DVD – Mini Raised Panels | Marc Sommerfeld | 2077 |
DVD – Mastering Woodworking Machines | Mark Duginske | 2076 |
DVD – Chip Carving | Wayne Barton | 2075 |
DVD – Carving Techniques And Projects | Sam Bush and Mark Headley | 2074 |
DVD – A Fine Woodworking Profile | Sam Maloof | 2073 |
DVD – A Fine Woodworking Profile | Tage Frid | 2072 |
DVD – A Simple Varnish Finish | Marc Spagnuolo | 2071 |
DVD – Chainsaw Carving – Let’s Carve a Face | Burt Fleming | 2070 |
DVD – Boxes, Goblets and Screwthreads | Dennis White | 2069 |
DVD – Pyrography Work Shop | Sue Walters | 2068 |
DVD – Chair Weaving With Fibre Rush | Linda Hickman | 2067 |
DVD – Woodworking II | Home Improvement Series | 2066 |
DVD – Woodworking I | Home Improvement Series | 2065 |
DVD – Belvidere Store and Church Shop | Narrated by Tom Cowan | 2064 |
VHS – Mastering Your Table Saw | Kelly Mehler | 2063 |
DVD – Ted Baldwin – Toy Maker aka Ted-E-Bear | Channel 2 and Tennessee Crossroads | 2062 |
DVD – Mastering Your Bandsaw | Mark Duginske | 2061 |
DVD – The Versatile Router | Pat Warner | 2060 |
DVD – 2009 Christmas Slideshow | Loyd Ackerman | 2059 |
DVD – Making Small Boxes (November 2009 Meeting Program) | Ross Roepke | 2058 |
DVD – Sharpening Station | Bob Reese | 2057 |
DVD – Hand Cut Dovetails | Tom Cowan | 2056 |
CD – 100 Table Saw Tips | Shopnotes/Woodsmith | 2055 |
DVD – Sharpening a Plane Iron (20 minutes) | Bob Reese | 2054 |
DVD – 2009 Turning Bee (Interactive) Intro & Chainsaw Demo | Paul Fulks & Tom Cowan | 2053 |
DVD – Rough turning Demonstration (at the 2009 TVW Turning Bee) | Doyle McConnell | 2052 |
DVD – Building a Native American Flute | Ron Reimers | 2051 |
VHS – Professional Routing Secrets | The Workshop Companion | 2050 |
VHS – Turning Pens and other small Projects | PSI Woodworking | 2049 |
DVD – Wolverine Sharpening System | OneWay Manufacturing | 2048 |
DVD – Cabinet Doors | Woodline USA | 2047 |
DVD – Perfect Peppermill | Paul Chilton | 2046 |
DVD – Hand Scrapers | Christopher Schwarz | 2045 |
DVD – Wood Finishing Basics | Michael Dresdner | 2044 |
DVD – Pattern Approach For Marquetry | Jane Burke | 2043 |
DVD – Course, Medium and Fine | Christopher Schwarz | 2042 |
DVD – Wood Carving Basics | David Sabol | 2041 |
DVD – Basic Box Making | David Stowe | 2040 |
DVD – Wood Finishing | Frank Klausz | 2039 |
DVD – Using a hand plane | Ian Kirby | 2038 |
DVD – Hand-Applied Finishes | Jeff Jewitt | 2037 |
DVD – Making Shaker Oval Boxes | Brent Rourke | 2036 |
DVD – TN Crossroads Presentation –Woodburning | Brenda DeJoice | 2035 |
DVD – THE AESTHETICS & PROPERTIES OF WOOD | John Jordan | 2034 |
DVD – The Restoration Furnituremaker as Sleuth and Historian | Alf Sharp | 2033 |
CD – Windsor Chair Seminar (Fall 2006) | Greg Pennington | 2032 |
DVD – Legs for Furniture (December 2005 Program) | Tom Cowan | 2031 |
DVD – Shaker Boxes (2-19-08 Program) | Tim Arnold | 2030 |
VHS – Secrets for a Perfect Finish | Bob Flexner | 2029 |
DVD – TVW Christmas 2007 – Slides and Videos | Produced by Loyd Ackerman | 2028 |
VHS – The Leigh Router Joinery System The D4 Dove Tail Jig | Leigh Co. | 2027 |
DVD – Router Jigs and Techniques | Bernie Mass and Michael Rortune | 2026 |
DVD – Decorating Furniture from Fall 2007 Seminar | Tom Cowan | 2025 |
DVD – Split Turnings from Fall 2007 Seminar | Doyle McConnell | 2024 |
DVD – Sharpening from Fall 2007 Seminar | Bob Reese | 2023 |
DVD – Chair Caning from Fall 2007 Seminar | Jay Hazel | 2022 |
DVD – Cabriole Legs from Fall 2007 Seminar | Jim VanCleave | 2021 |
DVD – Turning for Christmas | Doyle McConnell & Chuck Taylor | 2020 |
DVD – An Introduction to Turning Segmented Vessels | Loyd Ackerman | 2019 |
DVD – Making Curved Wood Parts by Vacuum Pressing | Loyd Ackerman | 2018 |
DVD – TN Crossroads Presentation -Tagua Nut Turning | Loyd Ackerman | 2017 |
VHS – Turning Projects | Richard Raffan | 2016 |
VHS – Turning Wood | Richard Raffan | 2015 |
VHS – Turned Boxes – The Basic Box | Ray Key | 2014 |
DVD – Basic Wood Preparation | Loyd Ackerman | 2013 |
DVD – TN Crossroads Presentation – Toy Collection | Crocia Roberson | 2012 |
DVD – Dunlap Furniture | Tom Cowan | 2011 |
DVD – Baptismal Font – Design and Construction | Tom Cowan | 2010 |
DVD – Fibonacci – Design and Construction | Doyle McConnell | 2009 |
DVD – Hand Scrapers – Use and Sharpening | Henry Davis | 2008 |
DVD – String Inlay | Jim Van Cleave | 2007 |
DVD – Carving Fundamentals | Jim Wright | 2006 |
DVD – Shop Tour – Antique Equipment | Walter Clement | 2005 |
DVD – Greenwood Bowl Turning (Copy 2 – Part 2) | Tom Cowan | 2004 |
DVD – Greenwood Bowl Turning (Copy 2 – Part 1) | Tom Cowan | 2003 |
DVD – Greenwood Bowl Turning (Copy 1 – Part 2) | Tom Cowan | 2002 |
DVD – Greenwood Bowl Turning (Copy 1 – Part 1) | Tom Cowan | 2001 |
DVD – Safe Use of Table Saw | Loyd Ackerman | 2000 |