The following people have agreed to serve as contacts for their particular skills.  If you have questions, suggestions for activities, or other comments relating to these skills, please call these folks.  Their interest is to help the club better serve their area of expertise.  Your participation with them will help them achieve that goal.

          Design: Tom Cowan    967-4835                            Finishing:      Phil Bishop          967-4626
              Turning:        Tom Church   967-4460                            Carving:        Harry May           962-0215
              Sharpening:    Bob Reese     728-7974                             Joinery:        Ross Roepke       455-9140

The October program will be presented by Tom Cowan. The topic will be "Carving for Furniture in the Dunlap Style". Tom always makes a great presentation and this one promises to be great, also. You will enjoy watching Tom “work his artistic magic” and will learn some “tricks” to increase your woodworking skills.

The carvers finished the class at Jim Wright's on the proper techniques used to carve an "Indian Bust". They brought examples of their work to the September club meeting. The carvers will be demonstrating their talents at the Bell Buckle Tennessee Craft Show on October 22nd and 23rd. They will be carving on the "Totem Pole" and will soon complete this impressive project.

Our club has been invited to advertise the club and activities at the Woodcraft Store in Franklin on October 20 & 21. We will also be displaying some items made by club members. If you would like to help with this promotion, please contact Loyd Ackerman.

Due to the busy club schedule for the remainder of the calendar year, there will not be any more “Shop Tours” scheduled for the rest of the year. They will resume early next year. Thanks again to all the tour hosts and their willingness to “invite” the club into their shops. Thanks to Doyle McConnell for coordinating all the tours.

The Coffee County Fair activities went well. There was a good turnout of club members to help with the activities. The carvers brought their "Totem Pole" and created a lot of interest. Maurice Ryan was a big hit with the youngsters. Bob Reese and Bob Leonard worked on their projects. Tom Cowan demonstrated his "furniture carving" expertise. Doyle, Loyd, John and Chuck produced "chips" on the lathes. Larry Bowers completed a bowl he had roughed at the fair last year. Everyone had a good time and enjoyed the fellowship. Thanks to Doyle for organizing the effort.

David Whyte won First Place ribbons in two categories at the Coffee County Fair. He also won a "Best of Show" ribbon for his "Wood Art Sculptures” .

What a great meeting we had at our first TVW meeting at UTSI. It was one of the largest attended meeting we have had in a long time. A really wonderful place for our monthly meetings.

The Web site is being updated with the latest club news and events to help keep the members informed. Try accessing the Web site during the month to view the latest club announcements, news and activities.
 
 

We still have club business cards available. For those who have not heard about our cards they are free to members and contain information about the club.  The cards are designed so you can sign your name if you choose.   See Henry Davis if you want a supply of cards or need to get some more.

We strive to always keep the club membership roster up to date. If you have changes to your home address, phone number or email address please let us know so we can update our membership list.  Contact Henry Davis at 931-393-3191 or hdavis@cafes.net
 

Loyd Ackerman displayed a beautiful segmented vase.

Doyle McConnell brought two lidded vessels made from spalted hackberry. Both vessels were finished with lacquer. He also shared a video clip of “what not to do”. An 1850 vintage chest he is restoring had a top made from a singlewide board. However, the craftsman had applied a cross brace, glued and nailed, which caused the top to split.

Scott Short brought a maple bowl, which he had finished with Deft lacquer. This was his first turned bowl.

Ken Gould brought a carving of a coyote finished with a dremal tool and stained.  He also brought examples of scrimshaw carving on deer antlers. He showed a knife he had forged and attached a handle carved from deer antlers.

Jim Wright’s Carving Class composed of Bob Lowrance, Harry May, Ken Gould, Sam Mann, Bob Leonard and Dick Wollam displayed samples of their work.

Ross Roepke brought a cherry and walnut change box he made for a friend.

David Whyte showed more of his “wood art Sculptures”, which took “Best of Show” and  “1st place” awards in two categories at the Coffee County Fair.  These boxes are made of walnut and finished with high gloss lacquer.

Tom Cowan displayed a decorative pediment that he is carving in the “Dunlap Design” for a corner cabinet

Gary Runyon brought a natural edge cherry bowl that he had turned for a friend.  The finish was Minwax antique oil.

Dan Maher showed signs he had made for the stalls of his daughter-in-law’s horses.  He used the scroll saw to cut out the names and mounted them on various species of wood boards.

Andy Weaver brought a small hand carved boot finished with shoe polish. He also displayed a chest made from a walnut tree that had been cut from his grandfather’s yard. The chest was a labor of love for a brother that retired from the navy after 30 years service.

Tom Gillard, Jr. showed a teak raised panel door that he had made for a boat. Also, a runner for a medical table slide-out was duplicated with use of a pin router and an attachment he had designed.

Phil Bishop impressed the club with his carving, from mahogany, of a crown for a bed.  This was a duplicate of an existing antique crown.

Tom Church displayed an artistic table he created with an African cherry top.  The legs were of ash and the curved stretchers were of laminated walnut.

Larry Halbeck brought various samples of trim pieces that are being created for restoration projects.  His son, Tim, discussed the techniques used to produce some of the trim pieces from PVC material.

Dick Wollam showed a machine he had made for sharpening and honing his tools. This “home-made” system was very satisfactory and much less expense.
 
 

Electrical cords that get draped across a benchtop are ripe for damage, and such a situation could easily result in a serious electrical shock. If you plug in your tools above the bench instead of behind it, you won't have to drag cords across the work surface. For an overhead outlet that goes where you need it, fashion a boom, like the one shown, from 1x4 and 1x2 boards. It should be long enough to extend from the back of the bench to slightly past the bench front. Attach a power strip to one end, and hinge the other end to the wall behind the bench. For a long boom, add a guy wire from the free end of the boom to a point on the wall above the hinge. Rout a groove for the power cord, to avoid damage. Add a clamp-on reflector lamp for a simple, adjustable worklight.

----------From Wood-Online --------
 

WOODWORKER HUMOR

TOOL DEFINITION

CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large pry-bar that, for some unknown reason, has an accurately machined screwdriver tip on the end opposite the handle.